• Assemble cabinet boxes and components using drawings and measurements.
• Operate hand and power tools, including drills, saws, sanders, routers, and pneumatic tools.
• Apply and trim edge banding and assist with plastic laminate fabrication.
• Install hinges, drawer slides, shelving, and other cabinet hardware.
• Sand and prepare components; inspect finished work for accuracy and quality.
• Load and unload cabinets, countertops, materials, and tools.
• Assist with deliveries and cabinet installation at residential and commercial job sites.
• Keep the work area clean and follow shop safety procedures.

• Experience using hand and power tools required.
• Ability to read a tape measure, perform basic shop math, and follow drawings and instructions.
• Ability to stand, bend, lift, and carry cabinet components and materials.
• Willingness to work in the shop and assist with deliveries and installation.
• Cabinet assembly, woodworking, millwork, construction, or finish carpentry experience.
• Experience with edge banding, plastic laminate, commercial casework, or cabinet installation preferred.

• Assist the Project Manager with coordinating projects from initial customer requirements through production and completion, coordinating production activities to ensure products are completed accurately, efficiently, and according to customer specifications.
• Communicate professionally and effectively with customers, suppliers, production teams, and internal departments to ensure project requirements are clearly understood and fulfilled.
• Monitor project progress, schedules, materials, and production requirements to help ensure projects remain on track.
• Assist with resolving customer questions, production issues, material concerns, and other project-related challenges in a timely and professional manner.
• Coordinate with suppliers to help ensure materials, components, and resources are available when needed.
• Review customer requirements, drawings, specifications, and production information to help ensure accuracy throughout the project.
• Maintain clear and timely communication between customers, suppliers, production personnel, and management.
• Assist in identifying opportunities to improve production efficiency, product quality, customer satisfaction, and overall project profitability.
• Support efforts to accommodate customer needs while maintaining company quality standards, production requirements, schedules, and profitability.
• Help maintain strong customer relationships by providing responsive communication and ensuring commitments are properly followed through.
• Assist with identifying potential issues that could affect project schedules, quality, costs, or customer satisfaction and communicate them to the Project Manager.
• Maintain accurate project documentation, records, schedules, and other information as required.
• Ensure finished products meet customer expectations and established quality standards.
• Perform other project coordination and administrative duties as assigned by the Project Manager.

• Minimum of 2 years of experience in the steel industry
• Experience in Water/Wastewater treatment plants is a plus.
• Excellent communication skills: verbal and written.
• Proficient in technology such as: Computer skills, Word, Excel. Experience in   
• AutoCAD and FabTrol is a plus.
• Must be able to interpret construction documents (contract drawings and specifications) and understand our scope of work in the steel industry.
• Coordinate purchasing, steel drawings, and subcontract drawings

• Develop and maintain comprehensive production schedules based on customer orders, demand forecasts, capacity constraints, and inventory levels.
• Collaborate with Sales, Production, and Supply Chain teams to understand customer requirements, lead times, and production constraints.
• Analyze production data, including order volumes, material availability, and equipment capacity, to develop optimal production schedules.
• Monitor and adjust production schedules to accommodate changes in customer demand, material availability, and production constraints.
• Optimize the allocation of manpower, equipment, and materials to maximize production efficiency and minimize downtime.
• Coordinate with Procurement and Material Planning teams to ensure the timely availability of raw materials and components.
• Communicate production schedules and changes to Production, Engineering, Quality Assurance, and other relevant stakeholders.
• Track and report production performance, identify areas for improvement, and implement corrective actions.
• Collaborate with cross-functional teams to resolve scheduling conflicts, prioritize urgent orders, and manage capacity constraints.
• Support the implementation of Advanced Planning and Scheduling (APS) systems and continuous improvement initiatives.
• Maintain accurate production data, records, and scheduling information.

• Bachelor’s degree in Business, Supply Chain Management, or a related field preferred.
• Proven experience in production planning, scheduling, or a related role within a manufacturing environment, preferably in a complex production environment.
• Strong analytical and problem-solving skills with the ability to analyze data and make data-driven decisions.
• Proficiency with scheduling software or Advanced Planning and Scheduling (APS) systems.
• Excellent organizational and time management skills with the ability to prioritize tasks and meet deadlines in a fast-paced environment.
• In-depth knowledge of production processes, capacity planning, and inventory management principles.

• Programs, or manually controls, forming procedure in vacuum forming various sized acrylic sheets, including oven temperature, oven time, and vacuum pressure
• Aligns and positions proper forming rack and framing as required
• Transports acrylic sheets to holding fixtures online
• Cleans and prepares tooling and acrylic sheets for vacuum forming
• Aligns and positions aluminum tooling
• Transports aluminum tooling to and from storage rack to thermoformer 
• Perform preventive maintenance tasks daily
• Practice and follow all required safety regulations
• Records and serializes pieces formed, daily
• Maintains work area, e.g., cleans up, keeps material, equipment, etc. in clean working condition

• High school diploma or equivalent preferred
• Ability to undergo further in-house technical training
• Must have the ability to operate equipment with controls and settings and typical manufacturing equipment, including forklift
• Must have knowledge of common materials and production methods
• Computer skills required

• Mixes various raw materials from resin mixes according to specific guidelines and standard operating instructions
• Selects, cuts, and organizes acrylic sheet stock utilizing daily production schedule and according to specific guidelines and standard operating instructions
• Operates PIV according to specific guidelines
• Distributes raw materials, supplies, or component parts to appropriate production areas
• Maintains work area in a safe, clean, and organized condition
• Maintains accurate accountability of raw materials and production supplies
• Operates powered hand tools and specialized manufacturing equipment safely and according to standard operating instructions
• Use scanner to scan tickets and input to computer
• Performs all duties as assigned by supervision

• Experience operating a pallet jack is a must
• Must be able to read, interpret and apply specific work instructions to a high degree of accuracy and completeness
• Must possess good attention to detail and judgment when making operational decisions
• Effective at time management and prioritizing work requirements
• Coordinates individual activities with production needs according to a predetermined schedule and event timing
• Must be able to safely operate PIV. 
• Must obtain driver’s license through driver training as required
• Must be able to work independently
• Must be physically able to repetitively lift up to 50lbs 

• Deliver and setup computer hardware. This includes moving of computers, monitors, scanners, printers, and other related hardware from the setup or storage area to the associate’s work area. 
• Disassembling old computer hardware in the associate’s area and setting up the new computer hardware. New computer hardware that is a PC requires the Installation of printer queues and printer drivers after setup. Also, the PC setup requires logging the associate in and giving a brief explanation on how the new computer works.  Old computer hardware is completely removed from the associate’s area for either disposal or storage. 
• Responsible for the pick-up of miscellaneous personal computer hardware for disposal. This includes moving the disposal computer hardware to the Buildings and Grounds Department for salvage.
• Assist end users with setting up printers and troubleshooting printer issues. 
• Assist with cable and line drops. 
• Print and maintain barcodes.
• Perform other related duties as assigned.

• High School diploma or two-year degree in related area required.  
• 1-2 years previous experience preferred, however, candidates with less experience may be considered if the candidate possesses strong knowledge of computer hardware.  
• Experience with Microsoft Office is essential.  
• Telephone etiquette and the ability to interface with users and staff is required. 
• Must able to handle a fast-paced work environment. 
• Must be comfortable working at tall heights, in a lift, several feet in the air.

• Assemble products and components according to work instructions, drawings, and specifications. 
• Safely use hand and power tools, including drills and cutting tools. 
• Measure, cut, strip, and prepare wire and other assembly materials. 
• Assist production employees with manufacturing, fabrication, and assembly tasks. 
• Load, move, organize, and stage materials and finished products. 
• Inspect materials and completed products for defects and quality concerns. 
• Maintain a clean and safe workstation and follow all PPE and safety procedures. 
• Work efficiently with team members to meet daily production goals and complete assigned tasks.

• Previous manufacturing, fabrication, warehouse, construction, mechanical, or production experience preferred but not required. 
• Basic knowledge of hand and power tools; ability to safely operate drills and cutting equipment. 
• Basic mechanical aptitude and willingness to learn new processes and equipment. 
• Ability to lift and carry up to 50 pounds. 

• Ensure that all tools are supplied and available to use. 
• Responsible for utilizing a manual lathe machine for the polishing of tools used by the operative.
• Will use a manual horizontal lathe and will polish all tools to ensure production is getting the optimal yield
• Must indicate and align all tools to specification
• Must follow strict guidelines of training in reference to polishing
• Will polish all tools when required (E-seals and O-rings)
• Keep track of all tools polished and unpolished in a required log
• Keep machine and polishing area clean of all debris
• Must be able to operate forklift and other equipment to move larger tools around the shop

• At least 6 months of experience working in a manufacturing environment, or relevant experience
• Great communication skills
• Safety-conscious
• Prior machining experience
• Must have a High School Diploma/GED

• Develop and maintain production schedules based on customer orders, manufacturing capacity, and material availability.
• Release and track work orders; monitor work-in-progress (WIP) to meet delivery deadlines.
• Adjust schedules and coordinate priorities to address material shortages, production delays, and capacity constraints.
• Coordinate with purchasing, inventory, and warehouse teams to ensure materials are available for scheduled production.
• Maintain accurate schedules, job status, inventory information, and production records in the ERP/MRP system.
• Communicate production updates and delivery timelines across production, engineering, quality, logistics, and customer service.
• Track delivery performance, work-order completion, and schedule adherence; identify opportunities to improve workflow.
• Maintain production documentation and traceability in accordance with AS9100 requirements and company procedures; support audits as needed.

• High school diploma or GED required; associate’s or bachelor’s degree in business, supply chain, operations, or manufacturing preferred.
• 2–5 years of experience in production control, manufacturing planning, scheduling, or supply chain operations.
• Aerospace or regulated manufacturing experience preferred.
• Working knowledge of production scheduling, work-order management, and manufacturing processes.
• Experience using ERP/MRP systems and proficiency in Microsoft Excel and other Microsoft Office applications.
• Strong organizational, problem-solving, and communication skills; ability to manage competing production priorities.
• Ability to frequently lift, push, and pull objects weighing 85 pounds or more.

• Perform precision scribing on aerospace components to mark areas for chemical milling.
• Read engineering drawings, templates, and work instructions to ensure accurate layout and required tolerances.
• Measure and mark parts using calipers, rulers, and layout tools.
• Inspect surfaces and coordinate with masking personnel to prepare parts for processing.
• Check scribe lines for accuracy and report defects or inconsistencies.
• Assist with staging and handling parts throughout production.
• Maintain scribing tools and equipment and complete production records.
• Follow quality and safety procedures, wear required protective equipment, and maintain a clean work area.

• High school diploma or GED required.
• Manufacturing, fabrication, or aerospace production experience preferred; 1–3 years desirable.
• Experience with precision layout, marking, or part preparation preferred.
• Ability to read engineering drawings and follow written work instructions.
• Basic knowledge of measuring tools and layout equipment.
• Ability to frequently lift, push, and pull objects weighing 85 pounds or more.

• Rack and un-rack parts for chem film and/or basic anodize processes.
• Perform metal finishing tasks, including pre-penetrant etches, chem film, and alkaline cleaning.
• Assist with basic touch-ups such as chem film on rack marks and coating repairs.
• Verify shop order accuracy, record completed work, and sign off all completed shop orders.

• High school diploma or GED required.
• Ability to lift or carry over 50 pounds.
• Must be able to bend, stoop, lift, stand, grasp, push, and pull for extended periods.

• Use paint application techniques and equipment to professionally finish interior and exterior surfaces using a paint gun and brushes
• Measures area to be painted; determines quantity and type of paint to use for the project per a shop order.
• Identifies appropriate paint colors and finishes, mixing if needed.
• Prepares surfaces to be painted, which may include removing prior finishes through chemicals, grit blast, or other methods.
• Masks, removes, covers, or otherwise protects parts and other nonpainted surfaces.
• Applies paint to interior and exterior surfaces using brushes, sprayers, airbrushes, stencils, and other tools.
• May apply specialty finishes and glazes.
• Complies with chemical and waste storage and disposal regulations and best practices.
• Maintains a clean work area.
• Maintains paperwork detailing material and labor time and costs.
• Performs other duties as assigned.
• Continues to expand the capabilities of the paint department to meet the needs of the company.
• Maintain operations per current EPA, OSHA and NESHAP Regulations.
• Any other job-related duties as assigned by supervisor or management.

• High school diploma or equivalent.
• Some painting experience.
• 5 years aircraft experience preferred.

• Receive incoming materials, parts, supplies, and equipment; verify shipments against purchase orders, packing slips, and delivery documentation.
• Inspect incoming and outgoing materials for correct quantities, damage, and accuracy, and report any discrepancies to the appropriate supervisor.
• Prepare finished fabricated products, parts, and materials for shipment, including packaging, labeling, staging, and completing required shipping documentation.
• Safely load and unload trucks using forklifts, pallet jacks, overhead cranes, or other material-handling equipment as required.
• Maintain accurate inventory and shipping/receiving records and ensure materials are properly identified, organized, and stored in designated areas.
• Coordinate with production, purchasing, and delivery personnel to ensure materials are received and customer orders are shipped accurately and on schedule.

• High school diploma or GED preferred.
• Previous shipping, receiving, warehouse, manufacturing, or material-handling experience preferred.
• Ability to operate a forklift and other material-handling equipment safely; forklift certification preferred or ability to obtain certification.
• Ability to read packing slips, purchase orders, work orders, shipping documents, part numbers, and basic measurements.
• Basic computer and data-entry skills with strong attention to detail and the ability to maintain accurate inventory and shipping records.
• Ability to safely lift and move materials, stand for extended periods, and work in an active metal fabrication/manufacturing environment while following all safety and PPE requirements.

• Performs preventative maintenance and repairs on all plant equipment and facilities.
• Performs diagnosis, testing, disassembly, inspection, repair and re-assembly of plant equipment, Forklift, straddle trucks, shag trucks, golf carts, and company vehicles.  
• Performs skilled troubleshooting and servicing of pneumatic and hydraulic components.
• Performs proper replacement and/or adjustment of mechanical clutches, drive trains, etc.
• Repairs worn parts, straightens and fabricates fixtures (welding, cutting, brazing, and surface hardening applications).
• Be able to troubleshoot electrical circuits, 12-48 volt DC
• Change and repair multiple tire sizes and styles 
• Assist junior personnel and operators in proper direction of equipment repairs.
• Ability to perform major and general repairs on all equipment.
• Required to record labor and material used on each repair made.
• Required to take proper care and use of test equipment.
• Required to properly use lift equipment (cranes, booms, man lifts, cherry picker, etc.)
• Exercise communication skills pertaining to the job.
• Occasionally will be called during irregular hours to handle production coverage with little or no supervision.
• Reports all abnormal conditions and safety hazards to supervisor.
• Will perform housekeeping and other routine tasks as directed.
• Is diligent at all times to work safely and to follow safe working practices, including Lockout/Tag Out procedures and other safety procedures.
• Lifting, carrying, bending, kneeling, stretching, stooping, and working in awkward and/or confined positions.
• Works in a team environment
• Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job.
• Other duties as assigned
• Make management aware of any training needs you have.  Consult your management immediately if you are being asked to perform work for which you are not trained and/or are not comfortable doing because of potential safety or risk implications. 

• 4+ years’ experience as an Industrial Mechanic 
• 4+ years’ experience working with pneumatic, hydraulic, electrical, and mechanical systems 
• PC literate (PLC software, Windows, etc.)

• Troubleshoots and performs mechanical repairs and planned, preventive and predictive maintenance of all equipment associated with operations.
• Installs machinery, pipes, structural steel, etc.
• Maintains correct stockroom inventory and keep orderly. 
• Interfaces with maintenance management system(s) including printing work orders, inputting information, etc. 
• Operate an angle grinder, hammer drill, and other powered hand tools.
• Operate man lifts, forklifts, or other construction-related equipment.
• Operate plasma, oxy-acetylene, and cutting wheels. 
• Perform minor metal fabrication and pipe fitting. 
• Weld using Tig, Mig, and stick methods. 
• Replace gearboxes, motors, drive belts, drive chains, shafts, and other mechanical transmission components. 
• Rig and move equipment or machines in a safe manner.  
• Assist with and/or perform minor electrical maintenance.

• High school diploma or GED.
• 3 to 5 years of Mechanical Maintenance experience in a manufacturing environment. (or applicable Mechanical Technical Degree)
• Experience in plant safety systems such as Confined Space entry, Hot Work permitting, and Lockout/Tagout of industrial equipment.
• Basic skills in areas of industrial mechanical equipment troubleshooting and repairs, pipe fitting, minor metal fabrication including welding, and proper use of mechanical tools.
• Ability to use a computer - basic computer skills. 
• Experience with a forklift preferred.
• Familiarity with natural gas safety systems and associated safety equipment.

• Set up, program, and operate a Haas VS-3 CNC vertical machining center.
• Create and edit CNC programs according to blueprints and specifications.
• Read and interpret blueprints, engineering drawings, dimensions, and machining specifications.
• Determine machining sequences, tooling, speeds, feeds, offsets, and workholding requirements.
• Select and install cutting tools and complete machine setups for new and repeat jobs.
• Load and properly secure raw materials and workpieces.
• Run first-piece parts and verify dimensions before continuing production.
• Monitor machining operations and make adjustments to maintain quality and accuracy.
• Inspect finished parts using tape measures and precision measuring instruments.
• Troubleshoot basic programming, tooling, setup, and machining issues.
• Identify and replace worn or damaged tooling.
• Safely operate a forklift to move materials as needed.
• Perform routine machine cleaning and basic preventive maintenance.

• Minimum of one year of CNC machining experience.
• Experience independently programming and setting up CNC machinery preferred.
• Previous experience operating Haas CNC equipment strongly preferred.
• Ability to program CNC machining operations, not solely load and unload parts.
• Ability to set up and operate CNC milling equipment with limited supervision.
• Ability to read and interpret blueprints and machining drawings.
• Working knowledge of machining processes, cutting tools, speeds, feeds, and offsets.
• Ability to accurately read a tape measure and use precision measuring instruments.
• Ability to identify and correct basic machining or programming issues.

• Drills or routers appropriate holes according to specifications, using powered tools
• Trim and grind all edges to meet dimensional specifications
• Make necessary adjustments on equipment to ensure quality work
• Maintains work area, e.g. cleans up, keeps materials, equipment, etc. in clean working condition
• Practices and follows all required safety regulations
• Performs all duties as assigned by supervision
• Trims units according to specs

• Requires moderate physical demand
• Requires ability to process a designated number of units
• Must be able to operate trimming, grinding, drilling and routering equipment
• Must be able to distinguish between shades of color
• Requires heavy, repetitive lifting
• Must be able to routinely lift up to 50 lbs.

• Read blueprints and drawings, and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications (e.g., cut material, roll material, weld material) 
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, rulers etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
• Test and inspect welded surfaces and structure to discover flaws
• Maintain equipment in a condition that does not compromise safety
• Advise management on needed actions
• Maintain effective communication with the Weld Lead to achieve desired results
• Operate heavy machinery and equipment, including overhead cranes and cutting torches
• Follow U/L Guidelines
• Keep a safe and clean work area
• Responsibilities are not limited to this list

• A minimum of two (2) years of industry experience preferred
• Management experience preferred
• Experience using a variety of welding equipment and procedures (MIG, TIG, MMA etc.) 
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings 
• Knowledge of relevant safety standards and willingness to use protective clothing (face shield, gloves etc.)
• Deftness, attention to detail, and detail-oriented
• Professional Certification (e.g., an AWS welding certificate) will be a plus 
• Experience operating forklifts

• Prepare boxes for shipment, conforming to applicable specifications and regulations
• Transports finished goods to staging areas
• Load and unload product per production requirements
• Perform housekeeping duties necessary to insure a clean department
• Responsible for inspecting all items being shipped
• Responsible for equipment and material

• Understanding verbal and written job assignments
• Knowledge of proper packaging material and loading of all products is required
• Will be required to complete an 6-page math test
• Able to lift up to 50 pounds.

• Retrieve, review, and accurately follow Quality Assurance Program (QAP) documentation.
• Read and interpret technical drawings, blueprints, work instructions, and product specifications.
• Assemble and disassemble products using hand and power tools according to established procedures and quality standards.
• Identify and report material or component issues that do not meet customer specifications.
• Perform hands-on mechanical assembly tasks while maintaining attention to detail and product quality.
• Maintain a clean, organized, and safety-conscious work environment.
• Follow all company safety procedures, production standards, and operational guidelines.
   

• High school diploma or GED required (proof of education required).
• Previous experience in manufacturing, assembly, mechanical work, construction, automotive, farming, welding, maintenance, or other hands-on environments is highly recommended.
• Experience using basic hand and power tools preferred.
• Mechanically inclined individuals with hands-on hobbies or experience 
• Strong attendance record, dependable work history, and commitment to workplace reliability required.
• Experience using basic hand and power tools preferred.
• Comfortable learning technical processes and following detailed instructions.
• Forklift certification required or willingness to obtain certification.
• Steel-toe boots required along with adherence to all safety protocols.
• Ability to lift up to 50 lbs throughout the shift.
• Candidates seeking long-term career opportunities are strongly encouraged to apply.

• Perform MIG welding (primarily pulse MIG) on a variety of metal components 
• Utilize Flux Core welding techniques as needed 
• Read and interpret blueprints, weld symbols, and technical drawings 
• Measure and cut materials accurately using tape measures and other tools 
• Fabricate and assemble parts according to specifications and quality standards 
• Inspect completed welds to ensure structural integrity and accuracy 
• Maintain a clean and organized work area 
• Follow all safety guidelines and procedures at all times
• Prepare materials by cutting, grinding, fitting, cleaning, and tacking
• Set up and troubleshoot welding equipment and fixtures 
• Work with carbon steel, stainless steel, and aluminum materials 
• Maintain production flow and complete required documentation

• Minimum of 2 years of welding/fabrication experience 
• Proficiency in MIG welding (pulse MIG preferred) and Flux Core 
• TIG welding experience is a plus, but not required 
• Ability to read blueprints, weld symbols, and use measuring devices accurately 
• Strong basic math skills, including fractions and decimal conversions 
• Must pass a weld test and interview process 
• Must provide own welding hood, gloves, and steel-toe safety shoes 
• High School Diploma or GED preferred (relevant experience considered in place of education) 
• Ability to lift up to 50 lbs and work in a manufacturing environment 
• AWS certification preferred but not required 

• Perform preventative maintenance and repairs on all plant and production equipment.
• Perform some diagnosis, testing, disassembly, inspecting, repair and re-assembly of plant equipment or components such as hydraulic machines, presses, shears, (hydraulic, mechanical and electrical), cranes, drill presses and components.
• Assists proper replacement and or adjustment of mechanical clutches, drive trains, etc.
• Will require fabrication of fixtures (welding, cutting, brazing and surface applications).
• Assists major and general repairs on all equipment. Incumbent performs skilled and technical work in areas of installation, maintenance, and repair of electrical equipment.
• Installs power distribution equipment, including high and low voltage systems.
• Installs all types of power distribution equipment including switchgear, I-lines, bus ways, gutters, disconnects, conduits and cables in accordance with National Electrical Code.
• Installs controllers and control equipment.  Incumbent performs minor electrical functions which include installation and repair of lighting, repair of small fixtures, appliances, welders, wire feeders and motors, changing fuses and general house cleaning.
• Performs electrical troubleshooting and repair on all plant and production equipment.
• Troubleshoots pneumatic, hydraulic and mechanical issues when related to electrical problems.
• Types of equipment serviced include: cranes, lathes, drills, presses, shears, high frequency induction equipment, and distribution equipment.  
• Uses troubleshooting aids such as volt, ohm and amp meters, etc.  Efficiently and safely performs service work with little or no supervision.
• Checks machines for faulty wiring, excessively worn parts and unsafe conditions.
• Checks, diagnoses, and repairs failed electrical circuits, due to component failures.

• High School Diploma.
• Math skills, addition, subtraction, multiplication, division.
• Able and willing to read and comprehend hydraulic, pneumatic and mechanical schematics.
• Must know proper use of gauging equipment from .001 of an inch up, dial indicators, micrometers, feeler gauges, etc
• Knows and understands mechanisms.
• Understands and applies standard mechanical procedures and practices for repair and replacement of machine components.
• Understands and applies proper safety procedures when working on equipment and machines.
• Understands and applies the proper rigging techniques when using chains, slings, wire ropes, etc.
• Ability to weld, using both stick and MIG processes.
• Ability to use Band Saw, Plasma Cutter, Metal Shear and use a cutting torch.
• Must be capable of driving a forklift and operating a man lift.
• Understands and follow work instructions.
• Diagnose and repair electrically operated equipment in an industrial environment.
• Make repairs in accordance to the National Electrical Code and Valmont safety standards.
• Understand and comply with company procedures, policies, and work instructions.
• Capable of working inside and outside and in all types of climatic conditions throughout the year, with the majority being inside.

• Graduate of a technical school or apprenticeship program in a related field in Electrical Maintenance.
• Math skills, addition, subtraction, multiplication, division and fractions are used to compute power, current, voltage, resistance, etc.  
• Read and understand electrical schematics, blueprints and National Electrical Codes are used to comprehend complex electrical circuits both AC and DC.
• Knows and understands the various types of components used in an industrial environment such as disconnects, motor starters, relays, contactors, motors, transformers, switches (proximity and mechanical), timers, circuit protection, solenoids, etc.
• Have the mechanical skills to fabricate electrical panels, cut and bend conduit, install the electrical equipment, pull wires, etc. that are common to the trade.
• Understands the operation of welders and how to repair them.  Requires knowledge of rectifiers and SCRs.
• Prior maintenance experience.

• Pick and pack products to fulfill customer and store orders 
• Sort products and verify item numbers and quantities 
• Use handheld scanners and warehouse systems to process orders 
• Maintain order accuracy and meet productivity standards 
• Stock and replenish products in assigned warehouse locations 
• Follow all warehouse and safety procedures 
• Assist with other warehouse duties as needed 

• High school diploma or GED preferred 
• Warehouse or distribution center experience is a must
• Ability to work accurately in a fast-paced environment 
• Ability to stand, walk, bend, and lift up to 50 pounds throughout the shift 
• Willingness to work four 10-hour shifts and mandatory overtime as needed 
• Reliable attendance

• Prepare commercial vehicles and equipment for painting by removing grease, dirt, rust, and existing paint.
• Mix and match paints according to color and coating specifications.
• Apply primers, paint, finish coatings, rust-resistant undercoats, caulk, and sealants.
• Set up and adjust spray guns for proper paint flow and coating thickness.
• Mask surfaces and remove accessories to protect areas not being painted.
• Fill minor dents and scratches; sand surfaces between coats to improve adhesion and finish quality.
• Inspect painted surfaces for flaws and complete necessary touch-ups or corrections.
• Buff and wax finished surfaces as required.
• Disassemble, clean, and maintain spray equipment and related tools.
• Set up ventilation systems, ladders, scaffolding, and other portable equipment.
• Operate lifting or moving equipment to position materials and access work areas.
• Maintain a clean and organized work area.

• Knowledge of commercial or automotive surface preparation and spray-painting techniques.
• Ability to mix paint, match colors, and select the appropriate spray system.
• Strong attention to detail and commitment to quality workmanship.
• Ability to follow instructions and work independently or as part of a team.
• Effective verbal and written communication skills.
• Dependable, safety-conscious, and able to take initiative.
• Ability to regularly climb, balance, stoop, kneel, crouch, and crawl.
• Ability to lift, carry, push, or pull 20–50 pounds.
• Ability to distinguish visual details, colors, sounds, and workplace signals.

• Established, family-owned company with over 30 years of success
• Award-winning organization recognized for growth and excellence
• Monthly sales bonus program
• Butler Street professional sales training
• Ongoing AI, recruiting, and workforce consulting education
• Career advancement opportunities
• Supportive leadership and collaborative team environment
• Opportunity to make a real impact by helping businesses and changing lives through employment

• Prospect and develop new business through networking, referrals, cold calling, community involvement, and relationship building
• Conduct client meetings to assess workforce needs and recommend customized staffing and recruiting solutions
• Generate new business opportunities while expanding existing client relationships

• Build long-term partnerships with clients by providing exceptional service and proactive communication
• Conduct regular client visits to ensure satisfaction and identify additional workforce needs
• Serve as a trusted advisor by providing workforce insights, recruiting strategies, and staffing solutions

• Collaborate with Staffing Coordinators to ensure qualified candidates are matched with client needs
• Maintain communication throughout the recruiting and placement process to deliver an outstanding client experience
• Support successful employee placements and ongoing client satisfaction

• Manage and grow an assigned sales territory while developing strategic plans to increase market share
• Represent Personnel Services at networking events, industry meetings, and community organizations
• Stay informed on local labor market trends, hiring challenges, and competitive activity

• Maintain accurate customer information and sales activity within the CRM
• Track sales goals, pipeline activity, and business development metrics
• Consistently work toward achieving and exceeding monthly sales objectives

• Minimum of two years of outside B2B sales, business development, account management, or relationship management experience
• Staffing, recruiting, HR, payroll, or workforce solutions experience preferred
• Proven ability to build relationships and generate new business
• Excellent communication, presentation, and negotiation skills
• Self-motivated with strong organizational and time management skills
• Comfortable working independently while contributing to a collaborative team
• Strong computer skills, including Microsoft Office and CRM systems
• Valid driver's license with the ability to travel throughout the assigned territory

• Driven to build relationships and grow business
• Passionate about helping companies solve workforce challenges
• Confident meeting with business owners, HR professionals, and decision-makers
• Competitive, goal-oriented, and motivated by performance
• Professional, dependable, and committed to exceptional customer service

• Operate production equipment (injection/compression presses, hoists, pallet jacks, etc.) 
• Use measuring tools (scales, calipers, rulers) to ensure product accuracy 
• Follow company policies, procedures, and safety standards, including PPE 
• Meet production goals while maintaining product quality and specifications 
• Support preventive maintenance activities 
• Ensure proper product identification and traceability 
• Communicate effectively with team members and supervisors 

• Transport materials as needed 
• Maintain housekeeping standards 
• Comply with Health, Safety, and Environmental policies 
• Work collaboratively in a team environment 
• Assist with audits and other assigned duties 
• Manage time effectively and meet deadlines

• High school diploma or equivalent 
• 0–3 years of related experience preferred 
• Ability to obtain forklift certification 
• Basic communication, computer, and math skills 
• Ability to work with minimal supervision

• Operate a forklift to safely move materials and finished parts.
• Load, unload, and position materials using proper handling techniques.
• Measure materials accurately using a tape measure.
• Follow shop prints to prepare materials and assist with assigned tasks.
• Assist machinists and other shop personnel with daily operations.
• Organize materials, tools, and supplies.
• Maintain a clean work area and follow shop safety procedures.

• Safe forklift operation.
• Accurate tape measure reading.
• Basic shop print reading and comprehension.
• Safe lifting, moving, and positioning of materials.
• Follow instructions and work well with shop personnel.

• Perform MIG welding (primarily pulse MIG) on a variety of metal components 
• Utilize Flux Core welding techniques as needed 
• Read and interpret blueprints, weld symbols, and technical drawings 
• Measure and cut materials accurately using tape measures and other tools 
• Fabricate and assemble parts according to specifications and quality standards 
• Inspect completed welds to ensure structural integrity and accuracy 
• Maintain a clean and organized work area 
• Follow all safety guidelines and procedures at all times
• Prepare materials by cutting, grinding, fitting, cleaning, and tacking
• Set up and troubleshoot welding equipment and fixtures 
• Work with carbon steel, stainless steel, and aluminum materials 
• Maintain production flow and complete required documentation

• Minimum of 2 years of welding/fabrication experience 
• Proficiency in MIG welding (pulse MIG preferred) and Flux Core 
• TIG welding experience is a plus, but not required 
• Ability to read blueprints, weld symbols, and use measuring devices accurately 
• Strong basic math skills, including fractions and decimal conversions 
• Must pass a weld test and interview process 
• Must provide own welding hood, gloves, and steel-toe safety shoes 
• High School Diploma or GED preferred (relevant experience considered in place of education) 
• Ability to lift up to 50 lbs and work in a manufacturing environment 
• AWS certification preferred but not required 
• Strong attention to detail and commitment to quality workmanship 
• Reliable attendance and ability to work in a team-oriented environment

• Places parts in specified relationship to each other.
• Bolts, clips, screws, cements, or otherwise fastens parts together.
• Cuts, trims, or attaches various fabrics, plastics, or other materials throughout the production process.
• Tends machines, such as granulators, band saws, punch presses, or other machinery to perform designated production tasks.
• Works at different workstations as production needs require.
• Works where tasks vary as different models of the same article move along the process.
• Other duties may be assigned.

JOB REQUIREMENTS

• High school diploma or general education degree (GED).
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to speak effectively before employees and managers of the organization.

• Prepare first-off parts and perform audits of molded parts
• Remove excess flash from molded parts using a blade
• Rework parts as required after final inspection
• Load drums and sieve stones; inspect parts for quality finish
• Operate cryogenic machine (load, start, unload, inspect parts)
• Operate ovens (start, load, unload parts)
• Maintain strict part segregation by job number
• Follow all SOPs and quality procedures to ensure compliance

• Must wear required PPE in production areas, including hair net, shoe covers, lab coat, and other protective equipment
• Ability to follow detailed instructions and quality standards
• Strong attention to detail and manual dexterity
• Ability to stand for long periods and perform repetitive tasks

• Prepare first-off parts and perform audits of molded parts
• Remove excess flash from molded parts using a blade
• Rework parts as required after final inspection
• Load drums and sieve stones; inspect parts for quality finish
• Operate cryogenic machine (load, start, unload, inspect parts)
• Operate ovens (start, load, unload parts)
• Maintain strict part segregation by job number
• Follow all SOPs and quality procedures to ensure compliance

• Must wear required PPE in production areas, including hair net, shoe covers, lab coat, and other protective equipment
• Ability to follow detailed instructions and quality standards
• Strong attention to detail and manual dexterity
• Ability to stand for long periods and perform repetitive tasks

• Programs, or manually controls, forming procedure in vacuum forming various sized acrylic sheets, including oven temperature, oven time, and vacuum pressure
• Aligns and positions proper forming rack and framing as required
• Transports acrylic sheets to holding fixtures online
• Cleans and prepares tooling and acrylic sheets for vacuum forming
• Aligns and positions aluminum tooling
• Transports aluminum tooling to and from storage rack to thermoformer 
• Performs preventive maintenance tasks daily
• Practice and follow all required safety regulations
• Records and serializes pieces formed, daily
• Maintain work area, e.g., cleans up, keeps material, equipment, etc. inclean working condition
• Repetitive heavy lifting
• Performs other duties as assigned by supervision

• High school diploma or equivalent preferred
• Ability to undergo further in-house technical training
• Must have the ability to operate equipment with controls and settings and typical manufacturing equipment, including a forklift
• Must have knowledge of common materials and production methods
• Computer skills required

• Set up and operate an enclosed Amada CNC laser-cutting machine.
• Load carbon steel, stainless steel, aluminum, and other sheet materials.
• Select and run the correct machine program for each work order.
• Enter or adjust machine settings based on material type and thickness.
• Read and interpret blueprints, technical drawings, and production specifications.
• Monitor cutting operations and respond to machine alarms or errors.
• Inspect finished parts for proper dimensions, cut quality, and defects.
• Use calipers, micrometers, tape measures, and other measuring instruments.
• Remove completed parts and separate usable material from scrap.
• Change nozzles, clean lenses, and make basic machine adjustments.
• Perform routine cleaning and preventive maintenance.
• Record production quantities, material usage, and quality results.

• At least one year of experience operating laser-cutting machines or similar metal-fabrication equipment.
• Experience operating an Amada or similar CNC laser machine preferred.
• Ability to read blueprints and understand measurements and tolerances.
• Knowledge of sheet metal, material thicknesses, and laser-cutting processes.
• Experience using calipers, micrometers, and tape measures.
• Basic computer and mechanical troubleshooting skills.

• Use manual welding skills to manufacture weldments to defined specifications, workmanship standards, and production schedule.
• Prepare and set up necessary tools and equipment for welding jobs.
• Arrange parts for welding and staging processes.
• Perform quality inspections and checks per quality documentation/control plan, including documentation of results.
• Detect and report defective materials or questionable conditions to the Lead.
• Maintain work area and equipment in a clean, orderly condition, following prescribed safety procedures.
• Uphold site efficiency and productivity standards.
• Demonstrate continuous improvement for safety and quality standards and procedures.
• Perform other duties as assigned by the Lead.
• Assist in other work areas as needed.

• Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
• Must pass AWS certifications for MIG welding steel and aluminum.
• Basic understanding of welding symbols, print tolerances, and quality measuring equipment.
• Ability to read and comprehend simple instructions, short correspondence, and memos; write basic correspondence.
• Ability to read and interpret prints and work orders.
• Strong math skills, including addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals.
• Strong attention to detail and commitment to quality workmanship.

• Monitor a site-wide survey on an individual and confidential basis
• Responsible for letting employees in and out of the survey area & help maintain the flow of traffic. 
• Assist with any technical computer or website issues the employee may experience during the survey process.

• Must be available to have a Teams call for a review of the expectations and process.
• Must not look at the information presented.
• Must have basic computer skills. 
• Must be bilingual.  

• Perform preventive maintenance, inspections, and repairs on manufacturing equipment and facility systems. 
• Diagnose and troubleshoot mechanical, electrical, hydraulic, and pneumatic equipment issues. 
• Repair, replace, and adjust components such as drive systems, clutches, motors, and related equipment. 
• Perform welding, cutting, brazing, and basic fabrication as needed to support maintenance activities. 
• Conduct maintenance and repairs on industrial vehicles and mobile equipment, including forklifts and utility vehicles. 
• Utilize testing and diagnostic equipment to identify and resolve equipment malfunctions. 
• Safely operate lifting equipment, including cranes, man lifts, and other material-handling devices. 
• Accurately document maintenance work performed, parts used, and labor hours. 
• Respond to equipment breakdowns and occasional after-hours maintenance needs to support production operations. 
• Follow all safety procedures and promptly report unsafe conditions or equipment concerns. 
• Maintain a clean and organized work area and perform other duties as assigned. 

• Must be able to use tire-changing equipment and tools
• Ability to troubleshoot DC voltages
• Experience using and or /operating forklifts and overhead cranes
• Basic shop math. Multiplication, division, decimals to fractions, fractions to decimals.
• Knowledge of diesel and gasoline engines, transmissions, and related components. 
• Proficient in troubleshooting and repairing hydraulic systems. 
• Industrial maintenance or mechanic background in a manufacturing environment. 
• Skilled in working with pneumatic, hydraulic, electrical, and mechanical systems. 
• Comfortable using computer applications, including PLC software, Windows-based programs, and maintenance systems. 

• Work on the re-bagging production line, assisting with the packaging and handling of products.
• Remove filled bags from the re-bag line and stack them neatly and securely on pallets.
• Arrange bags on pallets in a manner that keeps the pallet stable and prevents products from falling or shifting.
• Shrink-wrap completed pallets when required to secure the product for storage or shipment.
• Pull slip sheets from designated areas and place them where needed for palletizing and product handling.
• Place slip sheets during the loading and unloading of trucks.
• Assist with preparing pallets and products for shipment.
• Help with the loading and unloading of trucks, following directions from supervisors and forklift operators.
• Assist with handling tote bags by lifting the ears/loops of the totes so forklift forks can properly hook onto and move them.
• Keep the production and work areas clean, organized, and free of debris or product spills.
• Follow instructions from supervisors and work as part of a production/warehouse team.
• Follow all company safety, food-safety, quality, and housekeeping procedures.
• Perform other general labor duties as assigned.

• Frequently lift and carry materials weighing up to 50 pounds.
• Stand and walk for extended periods.
• Repeatedly bend, stoop, reach, push, pull, and lift.
• Perform repetitive tasks while maintaining attention to safety and product quality.

• Operate overhead cranes and heavy forklifts safely to unload inbound freight and heavy materials.
• Receive incoming shipments and verify materials against bills of lading, packing slips, or purchase orders.
• Inspect incoming shipments for accuracy and document received materials.
• Accurately enter receiving information into the inventory management system to maintain current stock levels.
• Follow OSHA standards and company safety protocols for crane operation, forklift operation, and warehouse safety.
• Safely handle heavy materials while maintaining an organized and productive receiving environment.

• Proven experience safely operating forklifts in a receiving or industrial environment.
• Experience working in a fast-paced receiving or industrial environment.
• Ability to safely handle and move heavy materials.
• Ability to lift heavy items and stand for extended periods.
• Comfortable working in a warehouse environment.
• Willingness to complete certification training onsite.

• Press cord for post-cure final inspection departments, to follow instructions and maximize lift performance.
• Mold O-ring and custom/special products, ensuring the correct materials and tooling is used and the job card is filled and signed
• Ensure job card instructions are followed and understood, that the work is prioritized in-line with customer due date, informing the cell leader of any issued that may affect OTD
• Work in line with all relevant SOPs
• Ensure lift performance is maximized, where possible
• Ensure only good, quality products are passed along to the next stage
• Housekeeping is kept to the highest possible standards at all times and the end of the shift clean down is finished
• Ensure that an end/start handover is done and understood
• Must work assigned schedule and adhere to company timekeeping policy

• Relevant experience, preferably in a manufacturing setting
• Good verbal and written communication skills
• Reliable and predictable attendance

• Assemble products using hand tools and production equipment according to specifications.
• Load, repair, and store production equipment safely and accurately.
• Inspect components during assembly to identify defects and ensure product quality.
• Perform testing and verify completed assemblies meet quality standards.
• Maintain accurate inventory records and production documentation.
• Assist with inventory counts as needed.
• Perform basic preventive maintenance following written procedures and checklists.
• Maintain a clean, organized, and safe work area.
• Follow all OSHA and company safety policies and procedures.

• High school diploma or GED required.
• Previous manufacturing or assembly experience preferred; entry-level candidates are encouraged to apply.
• Basic mechanical aptitude and troubleshooting skills.
• Ability to lift up to 60 pounds.
• Ability to work in a fast-paced manufacturing environment.

• Position parts for assembly using engineering drawings
• Assemble components using bolts, screws, rivets, adhesives, and other fasteners
• Operate drill presses and riveting machines
• Install rivnuts and threaded inserts
• Solder components and cables with precision
• Build assemblies using various electronic components
• Use manual and automated cable stripping tools
• Assist with production testing of RF equipment
• Perform light metal finishing using hand files and scrapers
• Follow ISO procedures and work instructions
• Lift up to 50 lbs as needed

• High school diploma or GED
• 1+ year of assembly or related experience
• Ability to read basic drawings and work instructions
• Basic math skills
• Strong attention to detail
• Reliable and able to work in a fast-paced environment
• Ability to pass IPC Solder Certification within 6 months

• Assembling the equipment utilized in the packaging room.
• Perform minor routine maintenance of the equipment.
• Operate the Cryovac packaging machine and troubleshoot minor problems.
• Maintain the cleanliness of the Packaging Room.
• Clean equipment as required between products.
• Work safely while lifting and operating equipment.
• Perform duties while understanding and observing company policies on food safety, product quality and Good Manufacturing Practices.
• Other job duties as assigned.

• Requires a High School Diploma or equivalent
• Must have the ability to perform basic reading and math computations
• Able to lift 50 pounds periodically
• One year of experience in food manufacturing and/or machine operation

• Receive, inspect, and verify incoming shipments for accuracy and quality
• Pick, pack, label, and prepare outgoing orders for shipment
• Load and unload trucks using forklifts, pallet jacks, and other warehouse equipment
• Move raw materials, finished products, and packaging supplies throughout the facility
• Prepare shipping documents including packing slips and bills of lading
• Ensure shipments are packaged safely, securely, and efficiently
• Maintain accurate inventory and shipping records
• Follow all workplace safety procedures and company policies
• Assist with general warehouse and shipping duties as assigned

• Previous shipping, receiving, or warehouse experience preferred
• Forklift experience or certification preferred
• Ability to safely lift up to 50 lbs regularly and up to 100 lbs occasionally
• Comfortable working in a manufacturing or warehouse environment
• Basic math and computer skills required
• Must pass pre- employment math test

• Accurately count, measure, weigh, and mix materials.
• Prepare molding equipment and materials for daily production.
• Load reinforcing medium and resin or pre-mix charges into molding equipment.
• Execute molding cycles and make minor adjustments for quality control.
• Unload finished parts and inspect for quality compliance.
• Learn and follow hazardous material handling procedures.
• Maintain cleanliness in work areas and around equipment.
• Safely operate tools and equipment including sanders and scarifiers.
• Identify and understand different mixes and materials.
• Adhere to safety protocols and quality standards consistently.

• Prepare routine reports and correspondence.
• Perform basic math functions (add, subtract, multiply, divide) using whole numbers and standard units of measure.
• Use measuring tapes and other measuring/recording instruments.
• Regularly lift and/or move up to 50 pounds; occasionally lift and/or move up to 100 pounds.
• Must pass a pre-employment math test.
• Steel-toe boots are required.

• Perform basic maintenance tasks (e.g., hydraulic issues, replacing filters, motor/pump repairs)
• Assist with preventive maintenance on equipment and systems
• Inspecting facility to identify issues or safety hazards
• Maintain cleanliness of work areas, tools, and equipment 
• Respond to maintenance requests in a timely manner 
• Follow safety procedures and company policies
• Support senior technicians on more complex repairs
• Document completed work and report issues to supervisors
• Knowledge of maintenance CMMS
• Able to travel to warehouses for work orders

• 1–3 years of industrial maintenance experience preferred
• Experience in skilled trades such as electrical, mechanical, or machine repair preferred.
• Ability to lift up to 50 pounds and push or pull up to 100 pounds.
• Basic math skills, including addition, subtraction, multiplication, and division.
• Ability to read and interpret schematics, machine drawings, operating manuals, procedures, and maintenance instructions.
• Ability to prepare basic reports and maintain accurate records.
• Proficient in Microsoft Office applications.

• Demonstrate proficiency in Creel Associate job functions
• Demonstrate proficiency in Cut/Take Off Operator job functions
• Read and interpret engineering diagrams to properly set up materials on individual pultrusion lines
• Accurately count, measure, and weigh materials and products
• Maintain a strong focus on quality, safety, and customer service standards
• Understand material mixes and material identification processes
• Follow proper hazardous material handling and storage procedures
• Maintain working knowledge of part numbers and related materials
• Communicate effectively with shift personnel and team members
• Locate pultrusion line materials and perform machine set-ups efficiently
• Support consistent and on-time delivery of materials to production lines

• Ability to read and interpret safety rules, operating instructions, and procedure manuals.
• Strong written and verbal communication skills.
• Ability to follow detailed written or oral instructions.
• Problem-solving skills for standardized situations.
• Basic math proficiency (add, subtract, multiply, divide using whole numbers).
• Regularly lift/move up to 50 lbs; occasionally lift/move up to 100 lbs.
• Must be able to pass pre employment math test

• Gather materials and fabricate parts according to detailed blueprints and specifications.
• Measure, cut, grind, drill, and assemble components to required dimensions and tolerances.
• Safely operate power tools, hand tools, and fabrication equipment.
• Read and interpret blueprints, work orders, and safety procedures.
• Inspect finished products to ensure quality and accuracy.
• Maintain a clean and organized work area.
• Follow all company safety policies and procedures.
• Communicate effectively with supervisors and team members.
• Perform other duties as assigned by the supervisor.

• Ability to read and interpret detailed drawings and company documents.
• Strong basic math skills (including measurements and conversions).
• Ability to accurately measure using tape measures, calipers, or other precision instruments.
• Basic computer skills.
• Ability to safely operate power and hand tools.
• Knowledge of proper material handling and safety practices.
• Ability to lift 50–100 lbs as needed.
• Forklift experience preferred.
• Previous fabrication experience preferred.
• Must pass pre-employment math test.

• Demonstrate proficiency in Creel Associate job functions
• Demonstrate proficiency in Cut/Take Off Operator job functions
• Read and interpret engineering diagrams to properly set up materials on individual pultrusion lines
• Accurately count, measure, and weigh materials and products
• Maintain a strong focus on quality, safety, and customer service standards
• Understand material mixes and material identification processes
• Follow proper hazardous material handling and storage procedures
• Maintain working knowledge of part numbers and related materials
• Communicate effectively with shift personnel and team members
• Locate pultrusion line materials and perform machine set-ups efficiently
• Support consistent and on-time delivery of materials to production lines

• Ability to read and interpret safety rules, operating instructions, and procedure manuals.
• Strong written and verbal communication skills.
• Ability to follow detailed written or oral instructions.
• Problem-solving skills for standardized situations.
• Basic math proficiency (add, subtract, multiply, divide using whole numbers).
• Regularly lift/move up to 50 lbs; occasionally lift/move up to 100 lbs.

• Transports finished goods to staging areas.
• Load and unload product per production requirements
• Perform housekeeping duties necessary to ensure a clean department.
• Responsible for inspecting all items being shipped.
• Responsible for equipment and material

• Understanding verbal and written job assignments
• Knowledge of proper packaging material and loading of all products is required.
• Able to lift up to 50 pounds.

• Requires the ability to count, measure, weigh, and mix materials accurately.
• Position requires quality-oriented, safety-minded, and service-oriented individuals.
• Requires learning/knowledge of hazardous material handling.
• Preparation of molding equipment for daily operations.
• Responsible for preparing reinforcing medium and resin for molding.
• Load reinforcing medium and resin or premi charges of prescribed amount into molding equipment and carry out prescribed molding cycles. 
• Make minor adjustments to equipment, charge and/or cycle to obtain a quality product. 
• Unload the part from the molding equipment, ensuring the part meets quality standards.
• This position must learn and understand mixes and material identification.
• Housekeeping in and around molds, buildings on a daily basis, and wherever it is required.
• Proper and safe use of all equipment used on a daily basis (sander, scarfire, etc.)

• Ability to use basic math skills such as add, subtract, multiply, divide in all units of measure using whole numbers. 
• Ability to use measuring tapes and other recording instruments is required.
• Ability to stand and walk for long periods of time. 
• Required to use hands to fingers, handle, or feel and reach with hands and arms, feel object, tools, or controls. 
• The employee is required to talk or hear. 
• Ability to lift and/or move up to 50 pounds, occasionally lift and/or move up to 100 pounds.

• Accurately count, measure, weigh, and mix materials.
• Prepare molding equipment and materials for daily production.
• Load reinforcing medium and resin or pre-mix charges into molding equipment.
• Execute molding cycles and make minor adjustments for quality control.
• Unload finished parts and inspect for quality compliance.
• Learn and follow hazardous material handling procedures.
• Maintain cleanliness in work areas and around equipment.
• Safely operate tools and equipment including sanders and scarifiers.
• Identify and understand different mixes and materials.
• Adhere to safety protocols and quality standards consistently.

• Read and interpret safety rules, operating and maintenance instructions, and procedure manuals.
• Prepare routine reports and correspondence.
• Communicate effectively with managers and coworkers.
• Follow detailed written and oral instructions using sound judgment and common sense.
• Perform basic math functions (add, subtract, multiply, divide) using whole numbers and standard units of measure.
• Use measuring tapes and other measuring/recording instruments.
• Use hands and fingers to handle, feel, and reach; operate tools, objects, and controls.
• Regularly lift and/or move up to 50 pounds; occasionally lift and/or move up to 100 pounds.
• Must pass a pre-employment math test.
• Steel toe boots are required.

• Effectively retrieve, understand, and adhere to QAP documentation
• Gain the ability to properly read and interpret drawings and technical specifications.
• Gain the ability to identify simple deviations in material requirements to customer specifications
• Assemble and disassemble various product line products
• Keep a clean workstation

• High School diploma or GED required
• Must be able to be certified on forklift
• Good organization, interpersonal, and interaction skills
• Willingness to receive on-the-job training 
• Ability to work in a team environment
• Must be able to bend, stoop, and repetitively lifting of components up to 50 lbs.

• Weigh incoming and outgoing trucks and maintain accurate production, inventory, and shipping records.
• Perform data entry and process paperwork for incoming and outgoing deliveries.
• Answer and direct phone calls and communicate professionally with drivers, warehouse personnel, and office staff.
• File, organize, and retain office, shipping, and production documents.
• Assist with reports and general administrative duties.
• Maintain a clean, organized, and professional workspace.

• Strong computer and data entry skills required; Microsoft Office experience.
• Ability to operate standard office equipment such as copiers, scanners, and printers.
• Strong organizational skills and attention to detail.
• Ability to lift up to 50 pounds.

• Pack, fill, and seal bags of wood material.
• Fills display boxes and/or bailers with packaged products.
• Palletize bagged product.
• Loads wood logs on conveyor belt (as needed).
• Examines materials or products visually or with hands to ensure conformance to established standards.
• Maintains and cleans work areas with hand tools, including shovels and brooms, as required or requested.
• Follows established safety standards.
• Other duties as assigned.

• No work experience is required, but experience working around machinery in a manufacturing or production environment is preferred.
• Must be able to consistently lift approximately 40-50 pounds.
• Requires good hand-eye coordination to handle, control, or feel objects, tools, or materials. 
• Capable of standing, walking, bending, and stooping for extended periods (repeatedly).
• Must be able to work in varying outdoor weather conditions depending on the season.
• Able to follow detailed instructions.

• Pack, fill, and seal bags of wood material.
• Fills display boxes and/or bailers with packaged products.
• Palletize bagged product.
• Loads wood logs on conveyor belt (as needed).
• Examines materials or products visually or with hands to ensure conformance to established standards.
• Maintains and cleans work areas with hand tools, including shovels and brooms, as required or requested.
• Follows established safety standards.
• Other duties as assigned.

• No work experience is required, but experience working around machinery in a manufacturing or production environment is preferred.
• Must be able to consistently lift approximately 40-50 pounds.
• Requires good hand-eye coordination to handle, control, or feel objects, tools, or materials. 
• Capable of standing, walking, bending, and stooping for extended periods (repeatedly).
• Must be able to work in varying outdoor weather conditions depending on the season.
• Able to follow detailed instructions.

• Set up and operate CNC lathes and/or CNC mills to produce precision-machined components. 
• Interpret blueprints, engineering drawings, specifications, and work instructions. 
• Select and install tooling, fixtures, and workpieces for machining operations. 
• Enter and adjust machine offsets, speeds, feeds, and other operating parameters. 
• Monitor machining operations and make necessary adjustments to maintain quality and productivity. 
• Inspect finished components using precision measuring instruments to verify dimensions and tolerances. 
• Identify and troubleshoot machining, tooling, and quality issues. 
• Complete production and inspection documentation accurately. 
• Maintain a clean, organized, and safe work area. 
• Follow all safety procedures, quality standards, and company policies. 

• Minimum of five years of CNC machining experience operating CNC lathes and/or mills. 
• Minimum of two years of experience using HAAS CNC controls. 
• Strong knowledge of CNC machine setup, tooling, offsets, speeds, and feeds. 
• Ability to read and interpret blueprints, engineering drawings, and dimensional tolerances. 
• Proficiency with precision measuring instruments, such as calipers, micrometers, and gauges. 
• Strong mechanical aptitude, attention to detail, and problem-solving skills. 
• Ability to work independently and consistently produce accurate, high-quality components. 
• Must be available to work five days per week and Saturdays as needed based on production workload.

ESSENTIAL JOB FUNCTIONS

• Set up and operate manual lathes with Fanuc controls per blueprints, GD&T, and operation sheets
• Work with sheet metal and tight tolerances
• Prove out and make simple edits to NC programs; download/edit programs from CIMNET system
• Perform routine maintenance and monitor fluid levels; report malfunctions to maintenance/supervisor
• Maintain a clean and safe work area and machinery
• Accurately complete all required production paperwork
• Ensure all work meets quality standards and specifications
• Use precision tools to measure parts and verify tolerances
• Read and interpret blueprints, job orders, and tooling instructions
• Observe machining operations to detect malfunctions or excessive wear
• Maintain required personal tools for machinist duties

JOB REQUIREMENTS

• 2 plus years of experience of manual machining
• Proficient in operating and editing manual machine tools (e.g. lathes, grinders)
• Experience running/cutting threads on a manual lathe is required 
• Skilled in using precision instruments such as calipers and micrometers
• Understanding of metal properties and machining procedures
• Ability to read blueprints, schematics, and technical manuals
• Strong math and analytical skills
• Physical strength and stamina to lift heavy items
• High school diploma or equivalent required
• Vocational training or apprenticeship is a plus

• Recruit, interview, screen, and place qualified candidates.
• Post and manage job advertisements through multiple recruiting sources.
• Coordinate interviews, background checks, drug screens, onboarding, and new hire documentation.
• Maintain accurate applicant, employee, client, and recruiting records in company software.
• Process weekly payroll and client invoicing accurately and timely.
• Communicate with applicants, employees, clients, and internal team members by phone, email, text, and in person.
• Partner with the Area Account Executive to support existing clients and assist with business development activities.
• Conduct follow-up with employees and clients to ensure successful placements and resolve issues.
• Maintain confidentiality while following company policies and employment regulations.
• Perform other duties as assigned.

• High school diploma or GED required.
• 2 yrs experience in one or more of the following: customer service, front office, medical office, human resources, hotel front desk agent
• Proficient with Microsoft Outlook, Word, and Excel.
• Valid driver's license with reliable transportation.

• Competitive pay
• Bonus opportunities
• Medical, Dental & Vision Insurance
• Paid Holidays and Vacation
• Retirement Plan
• Professional training and development
• Career advancement opportunities

• Visually inspect and listen to machines and equipment to identify causes of malfunction
• Diagnose issues, replace or repair parts, and test for proper operation
• Detect faulty operations or defective materials and report issues as required
• Dismantle machines and equipment to access problem areas
• Inspect and measure parts to detect wear, misalignment, or other mechanical issues
• Perform emergency repairs and scheduled maintenance on production equipment
• Start machines and equipment to test operation following repairs
• Repair or replace defective parts, motors, belts, and adjust feed mechanisms
• Connect wiring to motors and fixtures, replace switches and fuses, and splice or insulate wires
• Conduct regular preventive maintenance on machinery and equipment
• Maintain clean work areas, tools, and equipment
• Remove dirt, dust, grease, and waste material from machines
• Clean and lubricate machine parts to ensure smooth operation
• Perform general building maintenance such as patching, painting, and minor plumbing repairs
• Assist with installation of new production machinery and equipment
• Maintain routine housekeeping standards and safety compliance

• Ability to operate a variety of hand tools and understand mechanical processes
• Basic knowledge of electronics and hydraulics
• Previous experience in a machine shop performing maintenance mechanic duties preferred
• Ability to perform basic math (add, subtract, multiply, divide using whole numbers, fractions, and decimals)
• Ability to read and interpret safety rules, operation and maintenance instructions, and procedure manuals
• Ability to read and understand electrical schematics
• High school diploma or equivalent required

• Receive, inspect, and verify incoming shipments for accuracy and damage.
• Load, unload, stage, and transport materials using forklifts and pallet jacks.
• Pick, pack, label, and prepare customer orders for shipment.
• Verify Bills of Lading (BOLs), packing slips, lot numbers, and shipping documentation.
• Utilize RF scanners and warehouse management systems to maintain accurate inventory records.
• Supply production with raw materials and packaging as needed.
• Maintain inventory accuracy through proper storage, product rotation (FIFO), and cycle counts.
• Follow GMP, food safety, OSHA, and company safety procedures.
• Maintain a clean, organized, and safe warehouse environment.
• Meet daily shipping, receiving, and productivity goals.

• Previous shipping and receiving or warehouse experience preferred.
• Forklift experience required; certification preferred.
• Experience using RF scanners and warehouse inventory systems.
• Knowledge of shipping documents, Bills of Lading (BOLs), and inventory control procedures.
• Ability to safely lift up to 50 pounds and stand, walk, bend, and reach throughout the shift.
• Ability to work in a fast-paced manufacturing environment.
• Food manufacturing or GMP experience is a plus.

• Package finished products in cartons, boxes, or bulk bags according to specifications.
• Ensure correct weight, accurate labeling, and proper stacking of all packaged goods.
• Construct and prepare empty packaging containers as needed.
• Pull and label product samples for analysis per established procedures.
• Enter daily production data into the packaging log accurately.
• Transport completed packages to warehouse storage locations.
• Maintain cleanliness and perform housekeeping in all assigned areas.
• Perform additional duties as needed to support safe and efficient operations.

• High school diploma or equivalent required.
• 3 years of packaging experience required.
• Basic computer skills and ability to enter data accurately.

• Cleans equipment and maintains a manufacturing area free from debris and dirt.  
• Operates machinery to bag and seal 50lb bags of product.
• Closely follows directions to operate machinery, hold or supply materials, and load or unload items on machinery and assembly lines. 
• Performs any unskilled job at the plant.
• May operate forklift when normal operator is out. 
• Reports any issues to supervisor or higher-level employee.  
• Performs other related duties as assigned. 

• Good verbal and written communication skills. 
• Ability to listen, understand, and follow directions.
• Ability to work in a variety of roles.
• Previous experience preferred.
• High school diploma or equivalent preferred. 
• Forklift certification preferred.
• Job training for this position is provided. 

• Prepare parts for coating 
• Follow all principles and practices of coating application 
• Operate all sandblasting and coating equipment 
• Determine paint flow, viscosity, and coating quality by performing visual inspections
• Ensure that all components are produced/coated efficiently, and are consistent with company established goals for quality and customer order on-time performance 
• Ensure quality standards and processes are used throughout facility 
• Ensure safety guidelines are being met to assure a safe work environment 
• Load and unload parts and/or products 
• Good knowledge of the mechanics and repair of painting equipment 
• Proper cleaning and maintenance of equipment
• Clean-up work areas, equipment, supplies and materials; apply standard safety practices and procedures. 

• Must be able to lift up to 30 pounds
• High School diploma or equivalent preferred
• Experience with manufacturing & production
• Bi-Lingual preferred
• Sandblasting experience required
• Able to read drawings is preferred
• Preferred working knowledge of calipers & gauges
• Detail-oriented and consistent
• Basic mathematics, reading and writing

• Assemble walls, roofs, floors, and related components.
• Follow assembly instructions, blueprints, and production specifications.
• Use hand tools, air tools, and power tools safely and efficiently.
• Accurately measure materials and components using a tape measure.
• Work with fractions and measurements to ensure proper fit and assembly.
• Maintain quality standards throughout the assembly process.
• Keep work areas clean, organized, and safe.
• Assist with general facility maintenance and housekeeping as needed.
• Meet production goals while maintaining workmanship standards.

• Previous manufacturing, assembly, construction, carpentry, or related experience preferred.
• Candidates with strong mechanical aptitude and a willingness to learn are encouraged to apply.
• Able to read and interpret assembly instructions, drawings, and blueprints.
• Must be comfortable working with measurements, fractions, and basic shop math.
• Able to accurately read a tape measure.
• Able to lift up to 20 pounds regularly.

• Operate a forklift to load and unload trucks and move totes, pallets, drums, and other materials.
• Receive incoming materials and prepare outgoing shipments.
• Repackage chemical products into designated containers and apply the appropriate labels.
• Verify product information, quantities, weights, lot numbers, and labels for accuracy.
• Measure and weigh dry ingredients according to written formulas and batch sheets.
• Blend dry chemical products following established procedures.
• Maintain proper product identification and separation to prevent contamination or product mix-ups.
• Complete required blending, production, inventory, shipping, receiving, and labeling documentation.
• Inspect totes, containers, pallets, and packaging for leaks, damage, or other concerns.
• Clean blending equipment, containers, tools, and work areas.
• Follow all chemical-handling, safety, and personal protective equipment requirements.
• Report spills, damaged containers, labeling errors, product discrepancies, injuries, and unsafe conditions immediately.
• Assist with inventory counts and warehouse organization.
• Perform additional warehouse, production, and material-handling duties as assigned.

• Previous forklift operating experience required.
• Ability to safely load, unload, move, and stage chemical totes and other materials.
• Ability to read and follow written formulas, labels, batch sheets, safety procedures, and work instructions.
• Basic math skills with the ability to accurately measure, weigh, and verify quantities.
• Strong attention to detail and ability to maintain accurate documentation.
• Ability to safely lift and carry up to 75 pounds.
• Previous warehouse, manufacturing, chemical blending, production, or industrial experience preferred.

• Operate clicker presses, lathes, ovens, and other production equipment safely and efficiently.
• Remove excess material or flash using hand trimming, die trimming, or machine trimming methods.
• Use razor blades, scalpels, scissors, and other sharp trimming tools safely.
• Inspect finished products to ensure they meet quality specifications and production standards.
• Use calipers, scales, rulers, and other measuring tools to verify product dimensions.
• Record production information accurately in the MRP system.
• Maintain proper product identification and traceability.
• Transport materials to and from designated production areas.
• Assist with preventive maintenance as needed.
• Follow established work procedures, safety policies, and PPE requirements.
• Maintain a clean and organized work area.
• Meet production deadlines with limited supervision.

• High school diploma or equivalent preferred; relevant manufacturing experience may be considered.
• Previous manufacturing, production, or machine operation experience preferred.
• Basic computer, math, and measurement skills.
• Ability to safely operate machinery and use hand-trimming tools.
• Ability to consistently lift and push up to 50 pounds.
• Must wear required PPE and safety footwear.
• Bilingual English/Spanish skills are a plus.

• Set up and operate press brake (metal bending) equipment in alignment with quality, productivity, safety, and site efficiency standards.
• Detect and report defective materials or questionable conditions to management or designer.
• Perform quality inspections according to documented quality plans and accurately record results.
• Identify and differentiate between material types (aluminum, 5000-series aluminum, steel, stainless steel, paint grip, galvanneal, galvanized) and adjust processes accordingly.
• Maintain work area, tools, and equipment in a clean and orderly manner while following prescribed safety procedures.
• Support continuous improvement efforts for safety, quality, and efficiency.
• Assist in other work areas and cross-train as needed.
• Adhere to attendance, safety, and site standards.

• High school diploma or equivalent required.
• Ability to read and interpret documents such as safety rules, blueprints, memos, and written instructions.
• Basic math skills, including addition, subtraction, multiplication, and division.
• Capability to identify and work with multiple types of metals and materials.
• Strong attention to detail and commitment to producing quality work.
• Adherence to safety practices and procedures.
• Ability to work effectively in a team environment and assist with cross-functional tasks.

• Set up and operate press brake (metal bending) equipment in alignment with quality, productivity, safety, and site efficiency standards.
• Detect and report defective materials or questionable conditions to management or designer.
• Perform quality inspections according to documented quality plans and accurately record results.
• Identify and differentiate between material types (aluminum, 5000-series aluminum, steel, stainless steel, paint grip, galvanneal, galvanized) and adjust processes accordingly.
• Maintain work area, tools, and equipment in a clean and orderly manner while following prescribed safety procedures.
• Support continuous improvement efforts for safety, quality, and efficiency.
• Assist in other work areas and cross-train as needed.
• Adhere to attendance, safety, and site standards.

• High school diploma or equivalent required.
• Ability to read and interpret documents such as safety rules, blueprints, memos, and written instructions.
• Basic math skills, including addition, subtraction, multiplication, and division.
• Capability to identify and work with multiple types of metals and materials.
• Strong attention to detail and commitment to producing quality work.
• Adherence to safety practices and procedures.
• Ability to work effectively in a team environment and assist with cross-functional tasks.

• Safely and efficiently operate equipment in a work environment that requires PPE to process rubber and rubber related materials for preforming blanks used in downstream processes while meeting specification and production requirements.
• Maintain safe and clean work environment
• Effectively and efficiently communicate with employees and management to meet production demands
• Safely and consistently operate process and mechanical equipment such as overhead hoist, pallet jack, hydraulic lift table and other equipment as required
• Effectively utilize measuring tools such as scale, calipers, rulers, and other tools as required
• Adhere to company policies, standard work procedures and job safety standards, including required PPE
• Support preventative maintenance program efforts 
• Accurately input data to the MRP system 
• Produce products within specifications and production requirements 
• Maintain product identification and traceability. 
• Transport materials to and from designated areas

• Basic oral and written communication skills
• Bilingual in English and Spanish is a plus
• Basic computer and arithmetic skills
• Required Education and Experience
• High school diploma or equivalent
• Able to consistently lift and push up to 50 pounds
• Ability to use measuring tools such as scales, calipers, and rulers

• Set up and operate CNC mills and/or lathes to manufacture precision metal components.
• Read and interpret blueprints, engineering drawings, and work instructions.
• Select, install, and adjust tooling, fixtures, and machine offsets.
• Perform first-piece, in-process, and final inspections using precision measuring instruments.
• Verify dimensions using micrometers, calipers, gauges, and other inspection equipment.
• Monitor machine performance and make machine adjustments to maintain quality standards.
• Load raw materials and unload finished parts.
• Deburr, clean, and inspect finished components.
• Replace worn cutting tools as needed.
• Maintain accurate production and quality records.
• Follow all company safety and quality procedures.

• Technical certificate in machining or a related field preferred, or at least 12 months of CNC machining experience; equivalent combinations of education and experience will be considered.
• Ability to read and interpret blueprints, technical drawings, procedure manuals, and safety guidelines.
• Proficient in the use of precision measuring tools, including micrometers, calipers, and gauges.
• Basic math skills, including addition, subtraction, multiplication, division, and shop trigonometry.
• Ability to solve practical problems and make real-time decisions in a manufacturing environment.
• Ability to understand and follow written, verbal, diagram, and schedule-based instructions.
• Ability to write basic production and quality reports.

• Load drums, sieve stones, and drum parts; inspect parts for quality and accuracy
• Operate cryo machine, including loading/unloading and verifying outcomes
• Perform modification duties on rings and parts as required
• Use an etching machine to mark part numbers on components
• Complete daily 5S housekeeping and organization tasks
• Follow safety procedures and perform other duties as assigned

• Prior experience in a manufacturing environment
• Experience operating a press or other production machinery
• High school diploma or GED
• Good verbal and written communication skills
• Strong attention to detail and quality standards
• Ability to stand, sit, and walk for extended periods
• Ability to reach with arms and lift up to 50 lbs.
• Regular and predictable attendance
• Basic math skills

• Clean all products using ultrasonic technology according to SOP and customer specifications
• Bag and label products properly per SOP and customer specifications
• Perform modifications on rings and parts as required
• Complete daily 5S duties to maintain a clean and organized work area
• Safely lift and handle materials up to 50 lbs

• Previous experience in a manufacturing environment preferred
• Strong verbal and written communication skills
• High attention to detail and accuracy
• Consistent and reliable attendance
• Solid understanding of basic math concepts

• Pick and pack products to fulfill customer and store orders 
• Sort products and verify item numbers and quantities 
• Use handheld scanners and warehouse systems to process orders 
• Maintain order accuracy and meet productivity standards 
• Stock and replenish products in assigned warehouse locations 
• Follow all warehouse and safety procedures 
• Assist with other warehouse duties as needed 

• High school diploma or GED preferred 
• Warehouse or distribution center experience is a must
• Ability to work accurately in a fast-paced environment 
• Ability to stand, walk, bend, and lift up to 50 pounds throughout the shift 
• Willingness to work four 10-hour shifts and mandatory overtime as needed 
• Reliable attendance

• Pick and pack products to fulfill customer and store orders 
• Sort products and verify item numbers and quantities 
• Use handheld scanners and warehouse systems to process orders 
• Maintain order accuracy and meet productivity standards 
• Stock and replenish products in assigned warehouse locations 
• Follow all warehouse and safety procedures 
• Assist with other warehouse duties as needed 

• High school diploma or GED preferred 
• Warehouse or distribution center experience is a must
• Ability to work accurately in a fast-paced environment 
• Ability to stand, walk, bend, and lift up to 50 pounds throughout the shift 
• Willingness to work four 10-hour shifts and mandatory overtime as needed 
• Reliable attendance

• Pick, pack, and ship orders accurately and on time.
• Verify products, quantities, and shipping documentation.
• Create shipping labels and process shipments using company systems.
• Load, unload, and move materials safely.
• Assist with receiving and inventory control as needed.
• Maintain a clean, organized, and safe work area.
• Follow all company policies and safety procedures.

• High school diploma or GED preferred.
• Previous shipping, warehouse, or logistics experience preferred.
• Basic computer skills.
• Ability to read shipping documents and work instructions.
• Ability to lift up to 50 pounds and stand for extended periods.

• Supervise and lead 2nd shift chemical processing and chemical milling operations.
• Oversee maintenance and repair of chemical processing lines, equipment, and tooling.
• Ensure daily production schedules, workflow, and quality standards are met.
• Supervise team leaders and employees in work order processing and shop operations.
• Track, process, and complete work orders accurately, including required logbook and maintenance release entries.
• Monitor and control shop expenses, labor hours, and operational costs.
• Maintain compliance with EPA, TCEQ, OSHA, NESHAP, and all chemical storage and disposal regulations.
• Maintain accurate documentation including labor tracking, material usage, quality logs, process logs, and EHS records.
• Support project management activities, including customer communication, pricing, and project coordination.
• Provide employee coaching, performance management, and issue resolution.
• Prepare and communicate shift performance metrics and progress reports to management.
• Perform additional duties as assigned by the General Manager.

• High School Diploma or equivalent required.
• Nadcap and AS9100 experience required.
• Advanced knowledge of aircraft chemical anodizing/chem-film (pre-treatment) processes required.
• Strong understanding of chemical milling processes.
• Prior supervisory experience in a manufacturing or aerospace environment preferred.
• Ability to work independently, exercise sound judgment, and manage multiple priorities.
• Experience with work order systems and production documentation.
• Proficiency in Microsoft Excel and Microsoft Word.
• Strong organizational, communication, and leadership skills.
• Ability to work 2nd shift schedule.

• Recruit, interview, screen, and place qualified candidates.
• Post and manage job advertisements through multiple recruiting sources.
• Coordinate interviews, background checks, drug screens, onboarding, and new hire documentation.
• Maintain accurate applicant, employee, client, and recruiting records in company software.
• Process weekly payroll and client invoicing accurately and timely.
• Communicate with applicants, employees, clients, and internal team members by phone, email, text, and in person.
• Partner with the Area Account Executive to support existing clients and assist with business development activities.
• Conduct follow-up with employees and clients to ensure successful placements and resolve issues.
• Maintain confidentiality while following company policies and employment regulations.
• Perform other duties as assigned.

• High school diploma or GED required.
• 2 yrs experience in one or more of the following: customer service, front office, medical office, human resources, hotel front desk agent
• Proficient with Microsoft Outlook, Word, and Excel.
• Valid driver's license with reliable transportation.
• Bilingual (English/Spanish) is a plus but not required.

• Competitive pay
• Bonus opportunities
• Medical, Dental & Vision Insurance
• Paid Holidays and Vacation
• Retirement Plan
• Professional training and development
• Career advancement opportunities

• Pick and pack products to fulfill customer and store orders 
• Sort products and verify item numbers and quantities 
• Use handheld scanners and warehouse systems to process orders 
• Maintain order accuracy and meet productivity standards 
• Stock and replenish products in assigned warehouse locations 
• Follow all warehouse and safety procedures 
• Assist with other warehouse duties as needed 

• High school diploma or GED preferred 
• Warehouse or distribution center experience is a must
• Ability to work accurately in a fast-paced environment 
• Ability to stand, walk, bend, and lift up to 50 pounds throughout the shift 
• Willingness to work four 10-hour shifts and mandatory overtime as needed 
• Reliable attendance

• Perform welding and metal fabrication for facility projects, repairs, and modifications.
• Weld, fabricate, and repair fences, gates, and other metal structures.
• Measure, fit, cut, and assemble metal components as required.
• Inspect completed welds and fabricated parts for quality, accuracy, and durability.
• Troubleshoot welding and fabrication issues and make necessary repairs or adjustments.
• Assist with general facility maintenance and fabrication projects as needed.
• Safely operate welding equipment, hand tools, and fabrication equipment.
• Maintain a clean, organized, and safe work area.

• Previous professional welding and fabrication experience required.
• Strong welding, fitting, and metal fabrication skills.
• Ability to accurately measure, fit, and assemble metal components.
• Must pass a welding test.
• Personal welding hood and appropriate protective clothing are welcome but not required; equipment can be provided.

• Operate manual machining equipment including lathes and mills to fabricate parts to precise specifications.
• Set up machines by adjusting tools and equipment to match specified requirements.
• Perform tool changes, adjustments, and calibrations as needed.
• Read and interpret blueprints, engineering drawings, and work orders.
• Conduct in-process and final quality checks to ensure parts meet tolerance and quality standards.
• Collaborate with team members to improve machining processes and workflow efficiency.
• Maintain cleanliness and safety standards in the machining area.

• Proficiency in operating manual lathes, mills, and other machining equipment.
• Strong math skills for precise measurements and calculations.
• Ability to read and interpret technical drawings and work instructions.
• Experience with machine setup, including adjustment of tolerances and tooling.
• Detail-oriented with a focus on producing high-quality, accurate components.
• Experience with programming machinery is a plus.
• Commitment to safety, cleanliness, and teamwork in a manufacturing environment.

• Works with the loaders and Supervisors to move trucks and trailers from one location to another, according to assignments
• Moves trucks and trailers as needed to complete the loading process
• Ensures the trailer or truck is completely loaded and secured before moving from the staging area
• Works with Management to ensure the proper equipment is staged for shipping
• Works closely with Maintenance to ensure any repairs are finished before using equipment
• Helps keep truck parking yard free of debris and trash
• Arranges trucks and trailers in the yard in an orderly and efficient manner
• Moves trucks and trailers for receiving, when needed
• Any other duties assigned by Lead Person or Supervisor

• Exhibit regular and prompt attendance
• Ability to maintain attendance record in accordance with company
• Ability to lift 50 pounds 
• Demonstrate initiative to work independently, while flexible enough to work in team setting when needed

• Experience operating plate laser and/or press brake equipment in a manufacturing environment.
• Ability to read and interpret blueprints, work orders, and production drawings.
• Experience setting machine parameters, tooling, and programs.
• Ability to use tape measures, calipers, and other measuring tools.
• Experience inspecting finished parts for quality and dimensional accuracy.
• Basic troubleshooting, machine adjustments, and equipment inspections.
• Experience safely handling and moving metal materials.
• Forklift or overhead crane experience is a plus.

• Strong attention to detail and commitment to quality.
• Ability to perform basic math and accurately read measurements.
• Ability to safely lift, move, and handle metal materials.
• Ability to work in a fast-paced manufacturing environment.

• Applies the proper coat of glass and resin to molds or product according to specific guidelines and instructions
• Adjusts spray gun to insure adequate wetting of glass, proper weight of resin and glass, thickness, and application of material in roll able condition
• Maintains accurate count of ware sprayed, flow of product through work – process and adhere to standard operating procedures and quality specifications
• Maintains work area e.g. cleans up, keeps materials, equipment etc. in clean working condition
• Practices and follows all required safety regulations
• Performs all duties as assigned by supervision
• Repetitive heavy lifting
• Applies glass and resin to molds/shells
• Equipment designed for right-hand use

• Requires working knowledge of plastic application and spray equipment
• Computer skills required

• Material handling to move production carts/parts as needed to support the process.
• Maintain condition and part releasing of molds.
• Preparing materials and reinforcement of production parts.
• Demolding/unloading production equipment and parts.
• Perform tasks associated with automated trim cell operations.
• Inspect material and parts for defects at all process steps; scrap or rework parts that do not meet company requirements.
• Assemble product according to operating instructions.
• Package and palletize finished goods or move units to next operation.
• Refill material and supply needs at different workstations.
• Clean and maintain workstation. 

• High School Diploma or equivalent preferred.
• Ability to work safely in repetitive manufacturing conditions.
• Ability to operate/adjust industrial equipment and exercise good judgement to achieve acceptable performance results.
• Skilled with the use of common hand & power tools
• Skilled with the use of calibrated gauges and measuring tools/equipment.
• Must be able to exercise good judgement with a high attention to detail and be able to detect out of tolerance conditions.
• Must be able to read/interpret and apply detailed work instructions and utilize visual aids/charts to ensure manufacturing design/specifications are met.
• Must be able to work in a team environment.
• Must be able to routinely lift up to 50 lbs.

• Mixes various raw materials from resin mixes according to specific guidelines and standard operating instructions
• Selects, cuts, and organizes acrylic sheet stock utilizing daily production schedule and according to specific guidelines and standard operating instructions
• Operates PIV according to specific guidelines
• Distributes raw materials, supplies, or component parts to appropriate production areas
• Maintains work area in a safe, clean, and organized condition
• Maintains accurate accountability of raw materials and production supplies
• Operates powered hand tools and specialized manufacturing equipment safely and according to standard operating instructions
• Use scanner to scan tickets and input to computer
• Performs all duties as assigned by supervision

• Experience operating a pallet jack is a must
• Must be able to read, interpret and apply specific work instructions to a high degree of accuracy and completeness
• Must possess good attention to detail and judgment when making operational decisions
• Effective at time management and prioritizing work requirements
• Coordinates individual activities with production needs according to a predetermined schedule and event timing
• Must be able to safely operate PIV. 
• Must obtain driver’s license through driver training as required
• Must be able to work independently
• Must be physically able to repetitively lift up to 50lbs 

• Stack firewood neatly and securely on pallets according to size and quality standards. 
• Sort firewood by size, type, and condition before stacking. 
• Inspect wood and remove debris, nails, wire, or other foreign materials. 
• Wrap, band, or secure completed pallets for storage and shipment. 
• Move firewood and materials by hand or with approved equipment. 
• Assist with loading, unloading, and staging customer orders. 
• Monitor stacked pallets for stability, accuracy, and overall quality. 
• Maintain a clean, organized, and safe outdoor work area. 
• Follow all safety procedures and wear required personal protective equipment. 
• Meet daily production goals while maintaining quality standards. 
• Assist with general yard and production duties as needed. 

• Previous experience in production, lumber, landscaping, construction, farming, or outdoor labor is preferred. 
• Ability to repeatedly lift and carry 50–75 pounds. 
• Ability to stand, walk, bend, squat, kneel, and twist for extended periods. 
• Ability to safely use basic tools and material-handling equipment. 
• Strong attention to safety, quality, and pallet stability. 
• Willingness to work Saturdays and overtime as needed. 
• Steel-toe boots and other required personal protective equipment must be worn.

• Applies the proper coat of glass and resin to molds or product according to specific guidelines and instructions
• Adjusts spray gun to ensure adequate wetting of glass, proper weight of resin and glass, thickness, and application of material in rollable condition
• Maintains accurate count of ware sprayed, flow of product through work – process, and adhere to standard operating procedures and quality specifications
• Maintains work area e.g. cleans up, keeps materials, equipment etc. in clean working condition
• Practices and follows all required safety regulations
• Performs all duties as assigned by supervision
• Repetitive heavy lifting
• Applies glass and resin to molds/shells
• Equipment designed for right-hand use

• Requires working knowledge of plastic application and spray equipment
• Computer skills required

• Assist with drone spraying operations for agricultural and commercial applications
• Load, mix, and handle chemicals according to safety guidelines and company procedures
• Help prepare drones for daily operations, including battery changes and equipment setup
• Support field operations by transporting supplies, equipment, and materials to job sites
• Monitor spray operations and assist technicians as needed during applications
• Maintain cleanliness and organization of equipment, tools, and work areas
• Perform routine maintenance and basic troubleshooting on drone equipment and related tools
• Follow all safety protocols, environmental regulations, and application procedures

• Ability to lift and carry up to 50 pounds regularly
• Comfortable working outdoors in agricultural and commercial environments
• Strong attention to detail and commitment to safety procedures
• Ability to work around chemicals and follow proper handling procedures
• Mechanical aptitude or experience with equipment operation is a plus
• Agricultural, landscaping, spraying, or field service experience preferred but not required

• Established, family-owned company with over 30 years of success
• Award-winning organization recognized for growth and excellence
• Monthly sales bonus program
• Butler Street professional sales training
• Ongoing AI, recruiting, and workforce consulting education
• Career advancement opportunities
• Supportive leadership and collaborative team environment
• Opportunity to make a real impact by helping businesses and changing lives through employment

• Prospect and develop new business through networking, referrals, cold calling, community involvement, and relationship building
• Conduct client meetings to assess workforce needs and recommend customized staffing and recruiting solutions
• Generate new business opportunities while expanding existing client relationships

• Build long-term partnerships with clients by providing exceptional service and proactive communication
• Conduct regular client visits to ensure satisfaction and identify additional workforce needs
• Serve as a trusted advisor by providing workforce insights, recruiting strategies, and staffing solutions

• Collaborate with Staffing Coordinators to ensure qualified candidates are matched with client needs
• Maintain communication throughout the recruiting and placement process to deliver an outstanding client experience
• Support successful employee placements and ongoing client satisfaction

• Manage and grow an assigned sales territory while developing strategic plans to increase market share
• Represent Personnel Services at networking events, industry meetings, and community organizations
• Stay informed on local labor market trends, hiring challenges, and competitive activity

• Maintain accurate customer information and sales activity within the CRM
• Track sales goals, pipeline activity, and business development metrics
• Consistently work toward achieving and exceeding monthly sales objectives

• Minimum of two years of outside B2B sales, business development, account management, or relationship management experience
• Staffing, recruiting, HR, payroll, or workforce solutions experience preferred
• Proven ability to build relationships and generate new business
• Excellent communication, presentation, and negotiation skills
• Self-motivated with strong organizational and time management skills
• Comfortable working independently while contributing to a collaborative team
• Strong computer skills, including Microsoft Office and CRM systems
• Valid driver's license with the ability to travel throughout the assigned territory

• Driven to build relationships and grow business
• Passionate about helping companies solve workforce challenges
• Confident meeting with business owners, HR professionals, and decision-makers
• Competitive, goal-oriented, and motivated by performance
• Professional, dependable, and committed to exceptional customer service

• Programs, or manually controls, forming procedure in vacuum forming various sized acrylic sheets, including oven temperature, oven time, and vacuum pressure
• Aligns and positions proper forming rack and framing as required
• Transports acrylic sheets to holding fixtures online
• Cleans and prepares tooling and acrylic sheets for vacuum forming
• Aligns and positions aluminum tooling
• Transports aluminum tooling to and from storage rack to thermoformer 
• Performs preventive maintenance tasks daily
• Practices and follows all required safety regulations
• Records and serializes pieces formed daily
• Maintains work area, e.g., cleans up, keeps material, equipment, etc. in clean working condition
• Repetitive heavy lifting
• Performs other duties as assigned by supervision
• Hot work environment

• High school diploma or equivalent preferred
• Ability to undergo further in-house technical training
• Must have the ability to operate equipment with controls and settings and typical manufacturing equipment, including a forklift
• Must know common materials and production methods
• Computer skills required